AS-Interface inputs
D0, D1 | Positively driven NC contact 1 |
D2, D3 | Positively driven NC contact 2 |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D1 | Red LED |
D2 | Green LED |
LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Housing material | Anodized die-cast alloy |
Weight | |
Net | 1,2 kg |
Ambient temperature | -25 … 80 °C |
Degree of protection | IP67 |
Mechanical life | 2 x 106 |
Contact material | Silver alloy, gold flashed |
Switching principle | Slow-action switching contact |
Installation orientation | Any |
Number of door position positively driven contacts | |
According to As-i Safety at Work | 2 D0,D1,D2,D3 |
Connection | |
1 x | Plug connector M12 |
Approach speed | |
max. | 20 m/min |
Actuation frequency | 1200 1/h |
Retention force | 8 N |
Extraction force | 35 N |
Actuating force | 35 N |
Insertion depth | 52 mm |
Electrical connection ratings
ASi voltage | 30 V 22,5 … 31,6 V |
ASi operating current | max.45 mA |
ASi slave type | |
According to ASI specification 2.1 | EA code: 7 |
ID code: B | |
ASi data in | |
According to ASI safety at work | D0,D1,D2,D3 |
ASi data out | |
LED red | D1 |
LED green | D2 |
ASi LED | |
LED green | Power |
LED red | Fault |
Reliability values according to EN ISO 13849-1
B10D | 4,5 x 106 |
In combination with Actuator BETAETIGER-Z-GMechanical values and environment
Overtravel | 4 mm |
In combination with Actuator BETAETIGER-Z-GNMechanical values and environment
Overtravel | 16 mm |