Switching elementSnap-action switching contact, 1 NC contact and 1 NO contact
Single hole fixing limit switch allowed to be used as an end stop.
Dimension drawing
Wiring diagram
Dimension drawingWiring diagram
Technical dataApprovals
Mechanical values and environment
| Design | Switch head can be used as end stop (for bore O18H9) |
| Housing material | |
| Sleeve | Brass, nickel-plated |
| End stop | Hardened steel |
| Ambient temperature | -5 … 60 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Contact material | Fine silver gold-plated |
| Switching principle | Snap-action switching contact |
| Repeat accuracy (absolute) | ±0,01 mm |
| Installation orientation | Any |
| Number of NC contacts | 1 |
| Number of NO contacts | 1 |
| Connection | PUR cable |
| Cable length | 5 m |
| Approach speed | max.8 m/min |
| Actuating element | Ball plunger |
| Actuating force | |
| Approx. | 18 N |
Electrical connection ratings
| Utilization category according to EN 60947-5-1 | |
| AC-15 | 2A 230V |
| DC-13 | 1A 24V |
| Short circuit protection according to IEC 60269-1 | 2A gG |
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 2,5 kV |
| Switching voltage | |
| min. | 12 V |
| Switching current | |
| Min. at 24V | 10 mA |
| Connection cross-section | 0,75 mm? |
