Alignment of read head and actuator
Operating diagram, design A
CMS-R-AZA
- Typ. switch-on distance
- Typ. switch-off distance
| Design | A |
| Material | |
| Cable material | PVC |
| Housing material | Fiber glass reinforced PPS |
| Weight | |
| Net | 0,055 kg |
| Ambient temperature | -20 … 60 °C |
| Degree of protection | IP67 |
| Mechanical life | 100 x 106 |
| Installation orientation | Any, pay attention to marking |
| Tightening torque | 0,4 … 0,5 Nm |
| Number of NO contacts | 2 NO contacts with fuse, 100 mA each and 1 NO contact with LED |
| Connection | Hard-wired encapsulated cable with plug connector M12 |
| Cable length | 0,2 m |
| Number of LED displays | 1 LED contact status indication |
| Method of operation | Magnetic, reed contact |
Electrical connection ratings
| Rated conditional short-circuit current | 100 A |
| Fusing | |
| Power supply / safety contacts, external contact protection | Fuse 10 A gG |
| Switching voltage | 24 … 35 V DC |
| Contact status indication | 24 … 35 V DC |
| Switching current | max.100 mA |
| Contact status indication | max.15 mA |
| Switching voltage according to UL | |
| According to UL Class 2 | max.24 V AC/DC |
| Series resistance | |
| LED contact status indication | 1,5 k? |
| Switching frequency, electrical | |
| At I_min = 10 mA | max.5 Hz |
| At nominal current 8 A | max.0,1 Hz |
| Switching delay from state change | 26 ms |
Other
| In compliance with | EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013 |
Reliability values according to EN ISO 13849-1
| Monitoring of the safety guard position | |
| B10D | 20 x 106 |
In combination with Evaluation unit ESM-BA201, ESM-BA202, ESM-BA203, ESM-BA301, ESM-BA302, ESM-BA303, ESM-BA201P, ESM-BA301P and Actuator CMS-M-AIOperating distance
| Center offset | |
| At s=3 mm read distance | 2,5 mm |
| Assured switch-off distance Sar | max.20 mm |
| Contact status indication / LED | max.15 mm |
| Assured operating distance Sao | |
| With center offset m=0 | min.9 mm |
| Contact status indication / LED | min.7 mm |