Approach direction
Horizontal
Can be adjusted in 90° steps
Solenoid operating voltage
- DC 24 V +10% -15%
Guard locking type
| CET1 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
LED function display
| LED rot | illuminates when the solenoid is energized |
| LED grun | freely configurable |
Category according to EN ISO 13849-1
Important: The category in accordance with EN ISO 13849-1 is dependent on the evaluation unit used and on the installation position.
Notes
- Special connection cables from EUCHNER are required for the connection. Please take into account in the order!
- The device may be operated only in conjunction with the actuator CET-A-…. The actuator must be ordered separately.
Auxiliary release
Is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).
Dimension drawing
Block diagram
Dimension drawingBlock diagram
Technical dataApprovals
Mechanical values and environment
| Housing material | |
| Slide | Stainless steel |
| Safety switch | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 … 55 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| X | ±5 mm |
| Y | ±5 mm |
| Z | ±4 mm |
| Switching frequency | 1 Hz |
| Connection | 1 plug connector M12, 8-pin |
| Approach speed | 20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
Electrical connection ratings
| Operating voltage DC | |
| LED | 24 V DC -15% … 15% Reverse polarity protected |
| Current consumption | |
| LED | max.6 mA |
| ICM | 480 mA Solenoid |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% … +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 1,5 kV |
| Power consumption | |
| Solenoid | 12 W |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety class | |
| EN IEC 61140 | III |
