Multicode evaluationEvery suitable actuator is detected by the evaluation unit.
Guard lock monitoringEvaluation units in the series CES-AZ make it possible to use read heads with integrated guard locking for the protection of personnel during overtraveling machine movements. You will find suitable read heads in the accessories
Category according to EN ISO 13849-1Due to two redundant safety paths (relay contacts) with 2 internal, monitored normally open contacts per safety path, suitable for:
- Category 4/PL e according to EN ISO 13849-1
Each safety path is independently safe.
|OUT||Safety output status|
|TST||Input for self-test|
|O1||Monitoring output (semiconductor)|
|Y1, Y2||Feedback loop|
|S||Start button connection (monitoring of the falling edge)|
Important: The plug-in connection terminals are not included and must be ordered separately.
|Housing material||Plastic PA6.6|
|At UB = 24V DC||-20 … 55 °C|
|Not condensing||max.80 % rH|
|Degree of protection||IP20|
|Mounting method||Mounting rail 35mm according to DIN EN 60715 TH35|
|Sideways toward the neighboring device||min.10 mm|
|Number of read heads||1 read head can be connected|
|Ready delay||10 … 12 s|
|After change in the actuation status||max.210 ms |
Start typing to see products you are looking for.
Scroll To Top